Farnborough uPVC bay windows — Local Window Fitters

Replacing a Bay Window in Farnborough

A bay joins several window frames at angles, so measuring each pane is only part of the job. Before a Farnborough bay is priced, the installer should check the roof, base and surrounding masonry.

Send us a few details about your bay window and Hampshire Windows can pass it to independent installers covering Farnborough, Hampshire. Up to four installers may come back to you with a price, subject to their workload, and you pay nothing to ask or to decline.

What Makes Bay Replacement Different

On many older houses the original timber bay frame carries part of the weight of a small tiled or lead roof, or even the wall of a bay above. A uPVC frame is not designed to take that load alone. A proper survey checks what is resting on the bay before anything is priced, then specify bay poles or structural couplers at the corners to transfer it safely down to the base.

Say what sits on top of the bay. Photos of cracks or sagging above the window are very useful.

Common Bay Window Problems

• A sagging bay roof or cracks in the brickwork at the corners of the bay
• Soft or rotten timber where the facets meet the bottom rail
• Water getting in at the joints between the facets
• A cold, damp bay seat or window board in winter
• An old uPVC bay that has bowed, so the sashes rub or will not lock

If the roof covering over the bay is failing, it makes sense to sort it out at the same time, which may involve a roofer as well as the window installer.

Details to Settle at the Survey

Request a drawing showing the facets, opening sashes and corner connections. A projecting bow fitted in a formerly flat opening may need different support and permission from an existing canted bay.

From Survey to Finished Bay

1. Structural survey: each facet and angle is measured, and the installer checks the base and the load above.
2. Design and order: frames, couplers and bay poles are specified, and you confirm layout, colour and glass.
3. Supporting the structure: where needed, temporary support is installed before the old bay is removed.
4. Installation: new frames go in facet by facet, joined with couplers, and the poles are set to take the load.
5. Making good: the cill, bay board and trims are fitted, sashes adjusted, and props and old frames removed.

If the bay carries a roof or wall, the support arrangement needs deciding before removal. The survey may lead to an engineer’s assessment. Bay poles and couplers must transfer loads to an adequate base, and roof flashing defects need their own repair allowance.

Mention restricted front-garden access at your Farnborough home. Check the quote for internal bay-board work and external cill joints.

Budgeting for Your Bay

The guide range for this service is £1,800–£6,000. The lower end reflects a straightforward single-storey canted bay, while larger assemblies cost more; multiple bays, lintels and roof repairs can exceed it. It is a budget guide, not a fixed price.

Check each quote for scaffolding, bay poles, a new cill and bay board, bay roof repairs, VAT and making good inside. These items are sometimes priced separately and can make a big difference to the total.

Planning and Building Regulations in Farnborough

Replacing an existing bay with one of similar size and shape is normally treated as a like-for-like replacement. Building a new bay where there was a flat window, or changing its shape, alters the front of the house and is more likely to need planning permission. Ask Rushmoor Borough Council if you are changing the design, if the house is listed, or if it is in a conservation area.

The new bay must meet the Building Regulations like any other window, and a competent person scheme installer can usually self-certify it. Structural work beyond a straightforward replacement, such as a new lintel or rebuilt base, may need building control approval. The Planning Portal's Building Regulations guidance has more detail.

Also Covering

We can also pass enquiries to installers working in: Aldershot, Fleet, Blackwater, Yateley, Church Crookham, Hook. Each installer chooses its own coverage, so give your postcode.

Compare Quotes for Your Bay

Use the form to describe your bay and what sits above it. Hampshire Windows introduces enquiries and does not carry out installations. Businesses joining the network are asked for insurance details and references; check current evidence and ask to see similar bay jobs before you choose.

Treat the figures as a starting budget until the openings have been surveyed. Quantity, specification, access and additional work can take the total outside the range. Compare quotes for the work you actually need.

For eligible replacement work, confirm the installer’s scheme registration and certification arrangements. An appropriate building control approval route is another option; see the government guidance on competent person schemes. If the address lies within a national park, confirm which planning authority handles the property before ordering.